Jump to content

how do you make these cards go on to the real cards


taker55

Recommended Posts

I don't staple or use glue.

 

I bond them together with love.

Simple as that.

 

Shaco what an odd thing to say lol

 

Hmmm' date=' actually, rereading that, it sounds a lot weirder than I intended... [i']bonded together with love[/i]

uhhhh...

 

If under 13 do not highlight

Shaco jig it and stick it?

Link to comment
Share on other sites

There is a way you can stick the two together if you ABSOLUTELY want to.

You cannot glue them together. Reasons why:

1) cards may appear bubbled due to air pockets trapped between them.

2) cards will be rougher to the touch

3) cards will have uneven coloration (from the dye bleeding through the paper due to the glue)

 

If you want to stick the two cards together my suggestion would be super-thin two-sided tape. If you can make sure there are no pockets of air trapped behind the paper as you stick the two together, it will appear nearly perfect. Its as close as you can get.

 

The card damage will be permanent to the card u are sticking it to so please choose carefully.

 

But again, why would you want to destroy a perfectly good card like that? Konami wouldn't make a useless card...

 

I suggest just sticking it to a regular playing card (you know, ace of spades or something) and then sticking it into a card sleeve. They can't tell because the back is covered by the sleeve, and it feels close enough like a yu-gi-oh card they can't tell!

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...