Jump to content

Synchro Cards for Element Decks


Shedninjask

Recommended Posts

Here are some Synchro Monsters, one for each Element. The artwork comes from Genzoman (http://genzoman.deviantart.com/) whose artwork is truly inspiring. 

 

FIRE

[spoiler='Show']X61AAeo.jpg

1 Tuner + 1 or more FIRE Monsters
While this card is face-up on the field, your Opponent cannot Summon WATER Monsters. Once per turn, discard 1 card from your hand, add 1 FIRE Monster from your Deck to your hand.[/spoiler]

 

WATER

[spoiler='Show']gWqXfy5.jpg
1 Tuner + 1 or more WATER Monsters
While this card is face-up on the field, your Opponent cannot Summon FIRE Monsters. Once per turn, return a face-up WATER Monster you control to the Hand, Monsters you control cannot be effected by Spell and Trap Cards until the End Phase[/spoiler]

 

WIND

[spoiler='Show']K8XeLsg.jpg

1 Tuner + 1 or more WIND Monsters
While this card is face-up on the field, your Opponent cannot Summon EARTH Monsters. Once per turn, mill the top card of your deck, return up to two WIND Monsters on the field to the Hand.[/spoiler]

 

EARTH

[spoiler='Show']8UNd4Cw.jpg

1 Tuner + 1 or more EARTH Monsters
While this card is face-up on the field, your Opponent cannot Summon WIND Monsters. Once per turn, banish 1 face-up EARTH Monster you control, decrease the ATK and DEF of all Monsters your opponent controls by the banished monsters Level x200 until the End Phase[/spoiler]

 

DARK

[spoiler='Show']zhiFboY.jpg

1 Tuner + 1 or more DARK Monsters
While this card is face-up on the field, your Opponent cannot Summon LIGHT Monsters. Once per turn, pay 800 Life Points, banish 1 face-up non-DARK Monster on the field.[/spoiler]

 

LIGHT

[spoiler='Show']KGHAk6E.jpg

1 Tuner + 1 or more LIGHT Monsters
While this card is face-up on the field, your Opponent cannot Summon DARK Monsters. Once per turn, send 1 LIGHT Monster from your Deck to the Graveyard, select 1 Fairy-Type Monster you control, it can attack your Opponent directly.[/spoiler]

 

Thank you if you took the time to check this out, any cnc would be appreciated (especially Over/Underpowerment)

-Shedninjask

 

 

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...