Jump to content

Spriters Society


Jappio

Recommended Posts

  • Replies 432
  • Created
  • Last Reply
[center][quote name='Rampage567' timestamp='1295806004' post='4954601']
[IMG]http://i865.photobucket.com/albums/ab216/Rampage567/Splice-Minotaur.png[/IMG]
[/quote]
Tauros's head must be something evil I assume, because I rarely see it fitting on anything. It just looks oddly twisted on the body you have it on. You could have also added some extra level of flair. Find a way to turn the feet into hooves for example.

[quote name='Rampage567' timestamp='1295806004' post='4954601']
[IMG]http://i865.photobucket.com/albums/ab216/Rampage567/Splice-Dracenea.png[/IMG]
[/quote]
The body leading up to the chest is very straight and narrow. Much too stiff in my opinon. Lowering the uper body down a little may have helped in that case.

[quote name='Rampage567' timestamp='1295806004' post='4954601']
[IMG]http://i865.photobucket.com/albums/ab216/Rampage567/Splice-Cerbereus.png[/IMG]
[/quote]
Smart choice to use the different frames and sprites for the different head. Problem is their styles dont' full match. Also weird that the one in the back has the largest looking head. The neck on the closest one also looks kind of large to me.

[quote name='Rampage567' timestamp='1295806004' post='4954601']
[IMG]http://i865.photobucket.com/albums/ab216/Rampage567/Splice-Pegasus.png[/IMG]
[/quote]
I personally may have taken the flames away from this. Nightmares have flames, not pegasuses. Also the wing's position don't quite fit right, and the shading is off also.

[quote name='Shradow' timestamp='1295928160' post='4959076']
[img]http://img839.imageshack.us/img839/1028/ryuran.png[/img]
[/quote]
The shell hugs the body a little too much in the back. Making it stick just a little out could help with that. Also a little more editting in a few other places would be a little nice.

[quote name='Shradow' timestamp='1295928160' post='4959076']
[img]http://img251.imageshack.us/img251/6273/mewtogepi.png[/img]
[/quote]
This one feels even more plain then the last. Togepi I do admit lacks features, but still a few other things could be done to bridge the gap between the two Pokemon.Perhaps there would be a way to get some Togepi's facial features or the little spiky it has involved in someway?

[quote name='Shradow' timestamp='1295928160' post='4959076']
[img]http://img254.imageshack.us/img254/7527/serophanimon.png[/img]
[/quote]
I do admit i have fery little experiance with Digimon splicing. It's a style I don't know, and I usually can't tell what parts come from where. From what I can tell thoguh, I don't like how the legs are done. It's sort of unrealistic to think that the legs are completely hidden under that golden cloth there. In general with how wide the uper body is, there shoudl be some hips and legs sticking out on the side. It overall makes the thing look like it has no legs and is just a a floating torso.[/center]

-----------------------------


I really don't have much to say about this, do I? It's another set of Fakemon I guess.

I'm taking a risk with the lack of a border on the wind there. No Pokemon in 3rd gen really had just wind going about them, so there wasn't really a standard to go by there. Everything seems to almost always have some form of border, but the attack gfx for wind doesn't use borders, and some things like Ghastly's gas don't use a border, so hopefully my lack of it doesn't break too far away from the usual style GameFreak uses.

[IMG]http://i140.photobucket.com/albums/r15/Profit_Jappio/windguys.png[/IMG]
Link to comment
Share on other sites

I'll post a splice:

[IMG]http://img51.imageshack.us/img51/4121/pikerpuff.png[/IMG]

Jigglypuff + Pikachu + Butterfree

[IMG]http://img822.imageshack.us/img822/6380/pidbatz.png[/IMG]

Pidgeot + Crobat

[IMG]http://img543.imageshack.us/img543/8282/mudrachi.png[/IMG]

Mudkip + Masquerain + Jirachi

[quote name='Rampage567' timestamp='1295806004' post='4954601']
[indent][IMG]http://i865.photobucket.com/albums/ab216/Rampage567/Splice-Pegasus.png[/IMG][/indent]
PEGASUS(Ponyta + Articuno)[/indent]
[/quote]

Well the blue stuff (probably flames) looks like crystals, the wings doesn't match Ponyta's color, the wings looks like stick-ons if you know what I mean. I'm pretty basic at C+C. Hehe :unsure:

Link to comment
Share on other sites

[quote name='swordfire206' timestamp='1296179691' post='4966993']
I'll post a splice:
[IMG]http://img822.imageshack.us/img822/6380/pidbatz.png[/IMG]

Pidgeot + Crobat
[/quote]
Hmmn...... For the head piece, perhaps you should have (temporarily) removed Crobats wings, and maybe it's ear. Then put the head peice down. After it's in a good position, replace the wings, and any other pieces. I'm saying this because currently the head piece doesn't look attached, exactly.
You could maybe have put some more Pidgeot colors in there. Perhaps the insides of Crobat's wing?
It is pretty good though.

[IMG]http://img541.imageshack.us/img541/4229/weird2.png[/IMG]
This is V1 of a trainer splice someone requested of me on SPPF.
[IMG]http://img253.imageshack.us/img253/4859/weirds.png[/IMG]
And this is V2. I personally prefer V1, but....
Link to comment
Share on other sites

They both look good, and I prefer V1 as well. V2's feet look like they're backwards, but besides that they both look great.

Here's some of my recent work. I've been doing a lot in my shop.
[img]http://img248.imageshack.us/img248/8829/gardyena.png[/img]
Garevoir + Mightyena

[img]http://img253.imageshack.us/img253/4803/joltphlosion.png[/img]
Jolteon + Typhlosion

[img]http://img534.imageshack.us/img534/7194/meditails.png[/img]
Medicham + Ninetales

[img]http://img502.imageshack.us/img502/8763/tyraphlosion.png[/img]
Tyranitar + Typhlosion
Link to comment
Share on other sites

Reason they look backwards: They ARE backwards.
I couldn't find any good shoes from the back, y'know? I couldn't find any good trainer shoes where the trainer's back is to us. So I used that. And I'm not a good enough scratcher to scratch shoes from the back. Proves I'm lazy. Also that request was real difficult.

On the first splice, I don't see much Mightyena. I know the colors are, but the gray is too similar to white, so you don't really notice. But I can't reallt think of any good bits of Mightyena that could work...
On the second splice, I see more resamblance to Quilava, than Typhlosion. Afterall, Typhlosions head flame is basically Quilava's butt flame, to me at least.
The neck flame makes it look kinda wierd. It seems like Jolteon's head is just floating on the flame, in front of it's neck. I'm not good at explaining.. It might have looked better pointing upwards....
On the third splice, I like the way you did the head piece. Looks great! But yellow doesn't really suit Medicham..... Just personal taste, I suppose.
On the fourth splice, the red neck marks don't look shaded. And that lower flame; Is tat meant o be on the arm? Because if it is, wouldn't we see at edge of one on it's other arm? Ocerall, it's really cool, but there seems to be.... a bit too much Typhlosion. I only know it's Tyranitar because of the body shape.
Link to comment
Share on other sites

Crystal, it's like you know a lot of C+C in a short time <_< It doesn't really matter about too much Typhlosion or Tyranitar

On the Tyranitar + Typhlosion (the first time I saw someone spelt Typhlosion right :D This calls for a celebrations... *parties), the flames looks more like it comes from Quilava, the others looks great!

Link to comment
Share on other sites

[quote name='Shradow' timestamp='1296369269' post='4973232']
They both look good, and I prefer V1 as well. V2's feet look like they're backwards, but besides that they both look great.

Here's some of my recent work. I've been doing a lot in my shop.
[img]http://img248.imageshack.us/img248/8829/gardyena.png[/img]
Garevoir + Mightyena[/quote]

I dont see much mightyena... Perhaps make it have the bottom half of it?

[IMG]http://i865.photobucket.com/albums/ab216/Rampage567/Splice-Medusa.png[/IMG]

My appemt at Medusa, hard to make snake hair, Suggestions?

[IMG]http://i865.photobucket.com/albums/ab216/Rampage567/SpliceLarionArmo.png[/IMG]

a random splice.

[IMG]http://i865.photobucket.com/albums/ab216/Rampage567/Kampe-Splice.png[/IMG]

Another Gardevior splice. An attempt at Kampe.
Link to comment
Share on other sites

With the Medusa splice, Gardevoir seems to be at a weird angle. Perhaps doing the horizontal switch then reshading?
And at the point where Gardevoir clashes with Seviper, it changes from a light grey to a darker grey. You should maybe have color the shade that hit Gardevoir the same color. I have no idea how the explain in.... Move all of Sevipers Gardevoir shades up a bit? Switch dark gray for light gray, light gray for lighter gray, y'know? Then, if Gardevoir's pallete doesn't have enough shades, create a new one.
Yeah. Snake hair would be hard. [s]I'd use Dratini for that[/s] Perhaps leaving that top of her hair normal, then at the back do, I dunno, Dratini's that are reshaded to fit the bill? And maybe a few sticking from the top.
With the red patterns, I understand Gradevoir's red pallete leaves a lot to be desired, but the patterns look flat, and badly shaded. Making new shades can help with this.

The random splice looks nice. But I see too much Lairion. Try to add a bit more of.... well, whatever the other Pokemon/s were!

Addimitedly, I've never heard of Kampe, but it looks nice. However, Salamence's neck is relatively wide. The point were you cut off Gardevoir is thing. That makes for an odd image, right? Perhap you could have removed Salamence's neck, scratched another one that was Gradevoir's width at that point, then added Gardevoir. Or simple erased the neck and pur Gardevoir there. Short cut.

Hope these help a little! :D

Link to comment
Share on other sites

[quote name='Slicer224' timestamp='1296651943' post='4981354']
Anyways lately I have been working on a Fakemon and it's an Eveelution. It's a Steel Type but, as you can see it's not complete yet I was just seeking some advice/critique on it so far:
[IMG]http://i53.tinypic.com/2mza5cg.png[/IMG]
[/quote]
I dun like it. Looks like you just used the Pencil tool.

Acctually, I made a Splice that looks like a necklace some weeks ago, but I don't dare to show it of. I get kinda scared by critique now.
Link to comment
Share on other sites

[quote name='The Cake Is A Lie' timestamp='1296659342' post='4981572']
I dun like it. Looks like you just used the Pencil tool.

Acctually, I made a Splice that looks like a necklace some weeks ago, but I don't dare to show it of. I get kinda scared by critique now.
[/quote]Like I said it's a work in progress so definitely not close to the finished product. Also, it took a long time to get done what is done, just keep that in mind.
Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

Guest
This topic is now closed to further replies.

×
×
  • Create New...